Ember & Layer M12 Tool Post – Digital Files (3MF + STL, fits Milwaukee M12)

This is a digital download. You get the print-ready files to print the Ember & Layer M12 Tool Post yourself. No physical item ships.

The Tool Post is a wall- or bench-mounted holder compatible with Milwaukee M12 batteries and tools. It holds one M12 tool upright by its battery port: the tool slides onto the angled post just as it would onto an M12 battery, ready to grab and go. It carries the recessed faceted Ember & Layer flame on the flange, molded right into the part so it prints in one color.

What's in the download (ZIP)

• 2 print-ready 3MF files: single color, and a full plate of 4 (Bambu X1C)
• A single-color STL for any slicer, with the recessed faceted Ember & Layer flame built in
• A STEP file of the model
• A README with print settings and mounting instructions, plus the license

Features

• Fits the battery port of Milwaukee M12 tools (compatible with the M12 battery interface).
• 4 countersunk flange screw holes (#8 or M4 flat-head screws).
• Modules lock together side by side with a tongue-and-groove joint, so you can build a row of tool posts and battery holsters.
• Prints flange-down with no supports.

Recommended print settings

• PLA or PETG
• 0.2 mm layers
• 3 walls
• 15% infill
• Flange flat on the bed, no supports
• Single color: the recessed faceted Ember & Layer flame prints in the same filament, no AMS needed

Storing spare packs too? See our Ember & Layer M12 Battery Holster – Digital Files listing.

License: For personal use only. Do not resell or share these files or prints.

Milwaukee and M12 are trademarks of their respective owner; not affiliated with or endorsed by Milwaukee Tool.